Skip to main content

Palo Alto Networks

The Palo Alto integration reads PAN-OS firewalls and Panorama through the PAN-OS XML API. It runs on an Integrator inside your network, because the management interface of a firewall is not something the CyberOptix CTEM Platform should reach over the internet.

It is read-only. The integration never commits, pushes or changes configuration.

What it collects​

SyncCollects
Configuration backupThe running configuration, with secrets stripped on the Integrator before it leaves your network, versioned whenever it changes; security rules in evaluation order
Configuration reviewEvery configuration backup and NAT sync is reviewed against the configuration review checks, and what they find is raised as vulnerabilities on the device
Network discoveryInterfaces (zone, VLAN, virtual router, link state), the networks they are addressed into, and the routing table
Host discoveryARP entries and DHCP leases: what the firewall has actually seen on the network
Exposure correlationNAT and published-service rules, so an address reachable from outside is tied to what sits behind it

Pointed at Panorama, every sync also lists the firewalls Panorama manages.

What the firewall reports is kept as its own record, alongside hosts and subnets rather than written into them. A host the firewall sees that no scan has found yet is shown as seen on the network, not added to your managed assets.

Create a read-only API key​

  1. On the firewall or Panorama, create an Admin Role Profile that grants, under XML API, only Operational Requests and Configuration, and under Web UI and REST API, nothing. Leave Commit, User-ID and Export disabled.
  2. Create an administrator with that role and a strong password.
  3. Generate the key for that administrator:
curl -sk -X POST "https://<firewall>/api/?type=keygen" --data-urlencode "user=<admin>" --data-urlencode "password=<password>"

The <key> element in the response is the API key. The Integrator sends it in the X-PAN-KEY header, never in a URL.

Connect it​

  1. Under Integrations, add Palo Alto with the firewall's management hostname and the API key.
  2. In the integration's settings, assign the Integrator that can reach the firewall's management interface.
  3. Enable the syncs you want.

Certificates​

Firewalls ship with a self-signed management certificate. The first connection accepts it and records its fingerprint on the integration; every later connection must present the same certificate. If you replace the certificate, clear the pinned fingerprint in the integration's settings so the new one is recorded. A certificate issued by a trusted CA is verified normally and never pinned.